Contribute
Register

Can't boot from HDD/panic

Status
Not open for further replies.
So theoretically I did everything fine? But why is that, if I don't boot in verbose (press space on the drive in clover and select boot verbose), just normal boot and it kernel panics as on my very first picture?
 
May I ask you to clean it a bit, if it's not too hard, please?
 
May I ask you to clean it a bit, if it's not too hard, please?

You should probably start over... for example, you have a lot of patched kexts in EFI/Clover. First I wonder if all those are necessary, and second any patched system kext should be installed to /S/L/E, not injected. But I don't have experience with any Radeon graphics hardware either, so I'm not sure of the patches required anyway.
 
Alright, so I would need to all those kexts (or which of these are system kexts?) patch for example with kext utility and delete them from clover/efi, right? I know for sure that I need to patch then alxethernet, the radeon controllers, appleacpibatterymanaged and voodoops2controller.
Do I need the nullcpupowermanagement? Just cause I have it there and also have the patched ssdt in acpi/patched, but it's probably not enabled in clover.
What about the ahciportinjector, appleacpiplatform, fakesmc, ioahciblockstorage, do I need them? I don't really know what they do, just found them...
 
Last edited:
Alright, so I would need to all those kexts (or which of these are system kexts?) patch for example with kext utility and delete them from clover/efi, right? I know for sure that I need to patch then alxethernet, the radeon controllers, appleacpibatterymanaged and voodoops2controller.
Do I need the nullcpupowermanagement? Just cause I have it there and also have the patched ssdt in acpi/patched, but it's probably not enabled in clover.
What about the ahciportinjector, appleacpiplatform, fakesmc, ioahciblockstorage, do I need them? I don't really know what they do, just found them...

"system kexts" are those kexts that are installed by the OS X installer.
All kexts you need should be installed to the system volume.
Essential kexts (those you need to boot the installer) should be on EFI/Clover/kexts/Other.

It is covered in post #2 of the guide: http://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
Alright, I think I held just the necessary things. Anything else I could do?
 

Attachments

  • CLOVER.zip
    1.9 MB · Views: 110
Alright, I think I held just the necessary things. Anything else I could do?

You do not need:
- GenericUSBXHCI.kext
- IOAHCIBlockStorageInjector.kext
- NullCPUPowerManagement.kext (see power management guide)

The FakeSMC.kext you're using is old.

You should do some research on how to enable QE/CI with the Radeon HD7670M. I do not have any experience with Radeon.
 
Okay, I made the ssdt, removed those 3 kexts. Here is my ioreg, I think qe/ci is enabled and power management also seems fine, but could you tell it me for sure? And for the fakesmc, is it enough to put in efi/clover/kexts/other just the fakesmc.kext excluded the other kexts that are there in the zip?
 

Attachments

  • Filip’s MacBook Pro.ioreg
    4.6 MB · Views: 130
  • FakeSMC.zip
    144.2 KB · Views: 117
Okay, I made the ssdt, removed those 3 kexts. Here is my ioreg, I think qe/ci is enabled and power management also seems fine, but could you tell it me for sure? And for the fakesmc, is it enough to put in efi/clover/kexts/other just the fakesmc.kext excluded the other kexts that are there in the zip?

From ioreg CPU PM and QE/CI appear to be working.
All kexts you need should be installed to the system volume.
 
Status
Not open for further replies.
Back
Top