Contribute
Register

ASUS GTX 750ti (Dual fan non strix) El Capitan 10.11.6

Status
Not open for further replies.
Joined
Jul 20, 2016
Messages
5
CPU
i3-6100
Graphics
GTX 750 Ti
So I sucessfully got mac OSX 10.11.6 running on my pc (sortof) but it only displays through VGA
Specs:
Intel i3-6100
Asus B150M-a LGA 1151
Corsair Vengeance DDR4 8gb
Asus GTX 750 ti 2gb OC
Thermaltake 430W PSU


I am using bootflags -v and nvda_drv=1. It shows up as Asus Nvidia GTX 750ti 2gb in about my mac but it won't display through my DVI-D ports or my HDMI ports..(Both of which I need).
I am using Clover bootloader.
ANY help or suggestions would be appreciated. I am at a complete loss with this!
 
So I sucessfully got mac OSX 10.11.6 running on my pc (sortof) but it only displays through VGA
Specs:
Intel i3-6100
Asus B150M-a LGA 1151
Corsair Vengeance DDR4 8gb
Asus GTX 750 ti 2gb OC
Thermaltake 430W PSU


I am using bootflags -v and nvda_drv=1. It shows up as Asus Nvidia GTX 750ti 2gb in about my mac but it won't display through my DVI-D ports or my HDMI ports..(Both of which I need).
I am using Clover bootloader.
ANY help or suggestions would be appreciated. I am at a complete loss with this!

The Nvidia alternate drivers are needed for Maxwell-based cards such as yours: http://www.tonymacx86.com/threads/n...cs-drivers-for-os-x-10-11-6-346-03-15.198033/
 
Many Asus 750/750ti cards do not work with HDMI without flashing the vbios with one from another brand.
 
Nobody nose, I tried installing the new drivers and they booted up great with HD but only on VGA again.

I'm afraid I'll have to flash a different vender's bios onto it. Can someone link me to a confirmed working BIOS I can flash? I have done it before but did it with a gigabyte bios and messed it up and had to flash it back with a backup I had made.

I'm planning on using this bios:https://www.techpowerup.com/vgabios/153914/palit-gtx750ti-2048-140127

Let me know if that one is bad. The clock speeds are higher than my card which is worrying. If there is a better bios to use that you can link me to I would really appreciate it.
 
Nobody nose, I tried installing the new drivers and they booted up great with HD but only on VGA again.

I'm afraid I'll have to flash a different vender's bios onto it. Can someone link me to a confirmed working BIOS I can flash? I have done it before but did it with a gigabyte bios and messed it up and had to flash it back with a backup I had made.

I'm planning on using this bios:https://www.techpowerup.com/vgabios/153914/palit-gtx750ti-2048-140127

Let me know if that one is bad. The clock speeds are higher than my card which is worrying. If there is a better bios to use that you can link me to I would really appreciate it.

Not 100% positive but that Palit rom should be fine.
 
Do you have a Linux LiveCD laying around? If so, boot from it and see if DVI now works. Otherwise, what happens when you run the Clover Configurator Magic Wand utility? If that doesn't work then try disabling and re-enabling the drivers in Clover Configurator. If Linux LiveCD doesn't make DVI work then start with your BIOS settings.
 
Do you have a Linux LiveCD laying around? If so, boot from it and see if DVI now works. Otherwise, what happens when you run the Clover Configurator Magic Wand utility? If that doesn't work then try disabling and re-enabling the drivers in Clover Configurator. If Linux LiveCD doesn't make DVI work then start with your BIOS settings.
DVI works perfectly fine on any other operating system, except MAC OSX. I just tried flashing the Palit bios and waiting to reinstall drivers but it looks like it isn't going to work..

I'll try re enabling the drivers in MAC OSX but that hasn't worked ever in the past.

My last resort is just o use integrated graphics on MAC and manually switch it when I boot up mac. What config setting in Clover Configurator should I start with for the intel HD530?
 
Status
Not open for further replies.
Back
Top