- Joined
- May 8, 2021
- Messages
- 3
- Motherboard
- Asus ROG B450F
- CPU
- Amd Ryzen 7 3700X
- Graphics
- Nvidia RTX 2060
- Mobile Phone
Hello,
This week I got all my part for my PC (sorry) and hopefully the next few weeks I will finish my MacPro based case mod.
I joined to share my experience and ideas and also my struggles, and I hope all will come in the end good I will built something cool. On the way I am 100% sure I will ask for help from you all.
Process:
I got the case, btw its really hard to find nowdays specially in my part of the globe, let say there is no room for errors, so the planning part of the process take longer in my case. Here is few pic if you like to use for making your plans.
I would like to have a full case so I can do all the works and give some ideas....
1. clear up your schedule because it will take time until you clean it out, if its the first time, like for me, take a looong time
2. use some good quallity tools, because this stuff was builted for a lifetime #forever - I used the iFixit set, plus a big screwdriver.
3. sometimes you cant save all the parts for sale, or friends. ex: processor cooling tower. During the hammering and loosing process it bended...
4. ask for help, or look up videos, forums, sites its possible in 2021.
For people who like to plan digital/draw before start.
Here I am now with the process,
Plans/dreams:
- I like to keep the case in one piece as much as I can.
- Probably I cut an old pc case for the MB plate, back plate. I learned it can be easier.
- I am “inventing“ also other ideas for a future
- Keep it simple, since I dont have super/hyper home workshop CNC,Laser,Tools etc
- Well documented for helping others
Parts:
- Asus MB/PSU/GPU
- AMD Ryzen 7 CPU
- Corsair RAM
- Be quiet! fans
- Aorus m.2 SSD
CPU will have stock cooler for now, later water cooling so I need to work some not permanent solutions in the built for the front panel.
To Be Continued. Just I need to be in work too...
This week I got all my part for my PC (sorry) and hopefully the next few weeks I will finish my MacPro based case mod.
I joined to share my experience and ideas and also my struggles, and I hope all will come in the end good I will built something cool. On the way I am 100% sure I will ask for help from you all.
Process:
I got the case, btw its really hard to find nowdays specially in my part of the globe, let say there is no room for errors, so the planning part of the process take longer in my case. Here is few pic if you like to use for making your plans.
I would like to have a full case so I can do all the works and give some ideas....
1. clear up your schedule because it will take time until you clean it out, if its the first time, like for me, take a looong time
2. use some good quallity tools, because this stuff was builted for a lifetime #forever - I used the iFixit set, plus a big screwdriver.
3. sometimes you cant save all the parts for sale, or friends. ex: processor cooling tower. During the hammering and loosing process it bended...
4. ask for help, or look up videos, forums, sites its possible in 2021.
For people who like to plan digital/draw before start.
Here I am now with the process,
Plans/dreams:
- I like to keep the case in one piece as much as I can.
- Probably I cut an old pc case for the MB plate, back plate. I learned it can be easier.
- I am “inventing“ also other ideas for a future
- Keep it simple, since I dont have super/hyper home workshop CNC,Laser,Tools etc
- Well documented for helping others
Parts:
- Asus MB/PSU/GPU
- AMD Ryzen 7 CPU
- Corsair RAM
- Be quiet! fans
- Aorus m.2 SSD
CPU will have stock cooler for now, later water cooling so I need to work some not permanent solutions in the built for the front panel.
To Be Continued. Just I need to be in work too...