- Joined
- Dec 26, 2016
- Messages
- 37
- Motherboard
- raspberry pi 3
- CPU
- BCM2837
- Graphics
- BCM2837
- Classic Mac
Hey all , I've been unavailable to work on hobbies for a number of years but I now have some time again for a bit
and I was hoping to work on an iMac.
I was wondering if anyone has done this same hack but with a iMac slot loading G3. I've made good progress with help
from people over at macrumors but I was hoping that someone over here might have some info on connectors and boards.
I'm putting together diagrams with pinouts and would love some input.
Below is a link to the diagrams and code.
I've also included videos with my progress at the bottom of the page.
At the moment I/m looking to find out how the down converter board gets its power and what the pinout is for the
earphone jack.
Thanks in advance.
https://github.com/qbancoffee/imac_g3_ivad_board_init
and I was hoping to work on an iMac.
I was wondering if anyone has done this same hack but with a iMac slot loading G3. I've made good progress with help
from people over at macrumors but I was hoping that someone over here might have some info on connectors and boards.
I'm putting together diagrams with pinouts and would love some input.
Below is a link to the diagrams and code.
I've also included videos with my progress at the bottom of the page.
At the moment I/m looking to find out how the down converter board gets its power and what the pinout is for the
earphone jack.
Thanks in advance.
https://github.com/qbancoffee/imac_g3_ivad_board_init