Hello,
A friend of mine works in a recording studio and has always used Windows.
Some time ago he had a chance to try macOS decided to switch.
He asked me if I could try to make a Hackintosh of off his current PC build, I am a Mac user and software developer but I never built an Hackintosh...
Hi,
I have just set up my Hack on newest Ventura and OC 0.9.5 and by all means its working fairly good. I have attached my EFI but for the sake of the problem at hand you can always also refer to this git [1] where I took most of the ideas. This is tried and tested from what I read.
I have also...
This was written about many moons ago, you can search for Alpine Ridge
I have an AR v1 that I couldn't get to show up in Windows (11) Device Manager
I ran a single wire from the SPI-TPM pinout (3.3V pin) to the Force PWR (#1) pin on the AR card.
It works, no other connection needed.
I tested...
Hello, @CaseySJ I have an ASUS Prime X299 DELUXE II and I have tried every setting to make the HotPlug work but it doesn't work. Could you please be so kind to patch the Thunderbolt Firmware to activate the Bus? I tried to search for guides on what to modify in the firmware to activate the Bus...
Hi everyone,
I recently upgraded from Monterey to Ventura on my Hackintosh (fresh install on new HD) and everything is working fine except that macOS is not recognising one of my thunderbolt audio devices.
Monterey recognised everything fine.
I have a Universal Audio Apollo and an Avid HD...
When I turn on the computer the docking station works fine except CFast card. I need to hotplug while the computer is running, then everything is ok and the CFast card is visible in Finder. Asrock Z490 ITX/TB3.
My computer goes to sleep n monitor shows entering power saving mode ..
Here s my spec
CPU: 13900KF
Mobo: Z690 AERO D
CPU Cooler: Lian Galahad 240
SSD: WD SN 770 2TB
HDD: Seagate Exos 16TB
GPU: Sapphire RX 6600
Wifi Card: BCM94360NG
Cabinet: LianLi Mesh II
SMPS: 850W Antec Fully Modular
These...
I'm considering building a small form factor workstation and I have a question about the JBTB1 thunderbolt add-on card connector on the MSI Mag B660M Mortar WiFi. Most B660M boards available have a JTBT1 add-on card connector rather than the Gigabyte 2xAIC connectors which I have on my current...
Hi. I can't get Network over Thunderbolt in my Gigabyte Z590I Vision D setup and unfortunately this is mandatory.
Any idea how to make it work?
Is there any way to make the JHL8540 Maple Ridge controller appear in the Thunderbolt/USB4 System Report?
Thanks.
Hi all,
I have a question which I am really hoping someone on here can answer. My specs are in my signature. I have a recording studio and use the hackintosh that I built in 2014 as the main machine. I need to add some thunderbolt ports to the system. I am pretty sure my current mobo does not...
hello guys..this is my third system and this one is the latest upgraded one and i am having little trouble with the hardware..hoping to find the solution
System Configs are as follows
intel i9-11900KF lga 1200
MEG Z590 ACE.
AMD RADEON RX 6900XT
Things that doesn't work
Thunderbolt (On Board)...
Hi everyone, I recently found an amazing deal on a sonnet 750ex thunderbolt 3 eGPU enclosure and I'm trying to get it working with my Hackintosh Razer Blade 15 2018 Advanced running Catalina. I have a Dell OEM AMD R9 290X installed in it, and it works fine under windows (and on my real mac pro...
Hi everyone, I'm running Catalina on my 2018 Razer Blade 15 Advanced and recently purchased a third monitor (two external + the laptop display) to add to my setup. I needed a way to connect it to the intel UHD630 on this machine as the Nvidia card obviously isn't supported, so I decided to...
Good morning/evening!
Purchased a Pegasus Promise R6 a while back loaded to the brim with drives. Had good success using the Thunderbolt 3-2 adaptors with my MacBook but when it came to connecting them to my PC, the array wouldn't show.
The promise utility also doesn't open at all, let alone...
Hey everyone!
I just finished a (semi) successful build:
CPU is i9-11900k
GPU is Gigabyte AORUS RX580
MB is Gigabyte Z590 Vision D
Most of the things work, but I have 2 problems I couldn't figure out how to solve no matter how deep I dig.
First, Thunderbolt 4 Hot Plugging. I have no idea what...
I have a new x299 10g designare build, running 11.5.1
Thunderbolt is my big issue.
about every 20 reboots with various tricks (unplugging tb and plugging in at splash screen), unplugging and booting, then plugging in and rebooting) randomly, it works.
but one out of 20 is unacceptable for my...
Has anyone attempted to install 2 Thunderbolt cards in one Intel motherboard?
An example of something similar would be the mac mini which has 2 thunderbolt controllers on the motherboard (and hence 4 ports).
I've always assumed this is not possible.
Any further info appreciated.
LF
Hi there, I'm looking for help with a Thunderbolt 3 expansion card under macOS Catalina (10.15.7). I'm including what I believe is the most relevant info below. Thanks in advance for taking a look!
---
Gigabyte GC-Titan Ridge 2.0
https://www.amazon.com/dp/B08BC11XW8/?tag=tonymacx86com-20...
Hola everyone,
am running a hack since 3 years now and used to use clover - which worked pretty ok.
The past weeks i started to move to OpenCore and updating to bigsur on an experimental disk - and i tried to stay close to the guide.
After a while i managed to get through the installer but I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.