- Joined
- May 7, 2024
- Messages
- 1
- Motherboard
- Gigabyte B360 Aorus Gaming 3 WIFI-CF
- CPU
- i5-9600K
- Graphics
- RTX 3070
Specs:
CPU
Intel Core i5 9600K @ 3.70GHz 29 °C
Coffee Lake 14nm Technology
RAM
16,0GB Dual-Channel DDR4 @ 1330MHz (16-18-18-36)
Motherboard
Gigabyte Technology Co. Ltd. B360 AORUS GAMING 3 WIFI-CF (U3E1)
Graphics
MSI RTX3070
Storage
(future) macOS disk 931GB Samsung SSD 860 QVO 1TB (SATA (SSD))
(alternative macOS disk) 111GB SanDisk SDSSDA120G (SATA (SSD))
Windows 465GB Samsung SSD 970 EVO Plus 500GB (Unknown (SSD))
USB 14GB Intenso Rainbow Line USB Device (USB )
________________________________________________________________________
hey everybody i ran into an issue i couldnt fix so im trying my luck here.
I created the USB Stick with lastest Unibeast and latest Catalina it works fine so far, I can boot from it and access clover.
i boot from the stick to clover -> Disk Utility -> erase disk (GUID Partitioned) -> start installing (picture below) and it goes up ~80% then the installer closes the screen goes black and the pc reboots.
After that I have option to continue installation (boot from disk not from usb) this works until like 20% than it "crashes" too and reboots.
any ideas? thanks!
CPU
Intel Core i5 9600K @ 3.70GHz 29 °C
Coffee Lake 14nm Technology
RAM
16,0GB Dual-Channel DDR4 @ 1330MHz (16-18-18-36)
Motherboard
Gigabyte Technology Co. Ltd. B360 AORUS GAMING 3 WIFI-CF (U3E1)
Graphics
MSI RTX3070
Storage
(future) macOS disk 931GB Samsung SSD 860 QVO 1TB (SATA (SSD))
(alternative macOS disk) 111GB SanDisk SDSSDA120G (SATA (SSD))
Windows 465GB Samsung SSD 970 EVO Plus 500GB (Unknown (SSD))
USB 14GB Intenso Rainbow Line USB Device (USB )
________________________________________________________________________
hey everybody i ran into an issue i couldnt fix so im trying my luck here.
I created the USB Stick with lastest Unibeast and latest Catalina it works fine so far, I can boot from it and access clover.
i boot from the stick to clover -> Disk Utility -> erase disk (GUID Partitioned) -> start installing (picture below) and it goes up ~80% then the installer closes the screen goes black and the pc reboots.
After that I have option to continue installation (boot from disk not from usb) this works until like 20% than it "crashes" too and reboots.
any ideas? thanks!