Contribute
Register

HP Elitebook 1050 g1 cannot boot to recovery

I set the dvmt to 64 and i set option to legacy ig and that fixed it for now.
 
So i had to use external mouse and keyboard with usb c dock. Iwtlm got the wifi working. Battery stats are accurate enough. When my laptop went to sleep for sec it crashed unfortunately.

EDIT1:
So i added correct version of iwtlm for big sur. Installed voodops2. So when there is any operation performed on the disk installer crashes and laptop goes to Realtime Clock Power Loss(005)
EDIT2: I remade all aspci because i remembered they were mase before i added another ssd. Installation says 3h56min and still goes on so maybe fixed? Ill report later. Still haven't fixed
 

Attachments

  • IMG_20231022_001119837.jpg
    IMG_20231022_001119837.jpg
    3.5 MB · Views: 5
  • IMG_20231022_001343698.jpg
    IMG_20231022_001343698.jpg
    5.2 MB · Views: 7
Last edited:
Ok could you look over my config.plist and EFI folder there may be some issue causing this. I ncluded installation protocol which i managed to save before device crashed.
 

Attachments

  • config.plist
    41.2 KB · Views: 6
  • EFI.zip
    18.5 MB · Views: 9
  • Protokol instalace 21-Oct-2023.txt
    2.1 MB · Views: 10
So i added second nvme drive i had lying around somebody said that it worked for them with this one(kingston 2000something) I made 165gb partition for mac next to simple ntfs volume i had for games and installation is moving ig. 7min and it still haven't crashed
 

Attachments

  • IMG_20231022_144708549.jpg
    IMG_20231022_144708549.jpg
    2.9 MB · Views: 9
Install of big sur successful now only thing that remains is:

When i power down my ("mac os") to restarts my hardware clock.

Making dual booting with windows work.
 
Here is my current efi folder
Everything than the issues i mentioned in message before is working
 

Attachments

  • EFI.zip
    25.9 MB · Views: 11
Found fix

Adding RTCfixup kext
And rtcfx_exclude=00-FF
Now i have to figure bad regions.

Also camera not working:
From similar device thread i know i need to disable irc camera

Sd card reader:
Cant test
Other then that all good.
 
Last edited:
Hey could you look over my efi and config.plist please.
I might have set the reader wrong in device properties.
 

Attachments

  • EFI.zip
    25.9 MB · Views: 8
  • config.plist
    54.1 KB · Views: 4
Back
Top