- Joined
- May 16, 2021
- Messages
- 21
- Motherboard
- ASUS VIVOBOOK X509FA-EJ311TS
- CPU
- i3-10110U
- Graphics
- Intel UHD
- Mobile Phone
So now after mixing up your and dortania guide I've booted up Catalina, only thing not working is My nvme because if I don't put ssdt-nvme the OS won't boot ( any workaround for that?) And sound (will figure it out tomorrow) and I still have to test the power managementyes, as mentioned
also read post 2 of the guide
not sure, no files attachedSo now after mixing up your and dortania guide I've booted up Catalina, only thing not working is My nvme because if I don't put ssdt-nvme the OS won't boot ( any workaround for that?) And sound (will figure it out tomorrow) and I still have to test the power management
First of All, thank you so much to responding to all my questions. Secondly I'll state all the issues (EFI provided)not sure, no files attached
still didn't use the files from the guide....First of All, thank you so much to responding to all my questions. Secondly I'll state all the issues (EFI provided)
1 (most important). Any MacOS wint boot with my nvme, that is if I remove SSDT-NVMe the os wont boot, and I need my NVMe if I am to upgrade to Monterey
2. Sound not working
3. Screen Glitches If I close the lid and open it back on
4. Camera
5. As your guide states to use hackintool after install, hackintool shows my opencore as 0.6.1
6. What should I be doing now to make sure I can boot Monterey
Ok now for the good part
What works
Wifi (also I can choose which wifi to connect, I used ITLWM.kext to use the catalina installer)
Keyboard and trackpad with gestures
Gpu acceleration
Dual Boot
<key>DeviceProperties</key>
<dict>
<key>Add</key>
<dict>
<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
<dict>
<key>AAPL,ig-platform-id</key>
<data>AACbPg==</data>
<key>device-id</key>
<data>mz4AAA==</data>
<key>framebuffer-patch-enable </key>
<data>AQAAAA==</data>
<key>framebuffer-stolenmem </key>
<data>AAAwAQ==</data>
<key>framebuffer-fbmem </key>
<data>AACQAA==</data>
</dict>
</dict>
<key>Delete</key>
<dict/>
</dict>
Yes because Its a mix of both, I will remove this and check againstill didn't use the files from the guide....
no need for SATA-unsupported.kext, XHCI-unsupported.kext and CtlnaAHCIPort.kext
Ok let me look into itmissing your audio properties in this section:
Thats it? just usb config and oc update??you also need to do this before updating to Monterey:
and you will also need to update to latest OpenCore to be able to install MontereyThe New Beginner's Guide to USB Port Configuration
Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...www.tonymacx86.com
also what make and model is your NVME?
may not be compatibleYes because Its a mix of both, I will remove this and check again
Ok let me look into it
Thats it? just usb config and oc update??
Ok now this is embarrassing, its a cheap chinese nvme
After i removed both the ssdt-nvme and nvme fix the system now boots with the nvme. Why do you think removing the nvme fix kext made it boot?may not be compatible
probably wasn't compatible and wasn't neededAfter i removed both the ssdt-nvme and nvme fix the system now boots with the nvme. Why do you think removing the nvme fix kext made it boot?
Ok so now what's left is audio, mapping the usb ports .. then I can directly update to Monterey.. Right?probably wasn't compatible and wasn't needed
you only need kexts that makes something work
no need to through all the kexts you can find on the internet and hope for the best
sometimes less is more