Dell XPS 9300, ventura possible? Or stuck with Monterey!?

[supergreen71]

Hey guys, I have the XPS 9300 13" and runs perfectly with Monterey, any tips how to install Ventura on it? or not possible?

 

[Feartech]

Hey guys, I have the XPS 9300 13" and runs perfectly with Monterey, any tips how to install Ventura on it? or not possible?

as long as your bootloader is up to date along with your kexts, then shouldn't be an issue

 

[supergreen71]

as long as your bootloader is up to date along with your kexts, then shouldn't be an issue

All kexts where up to date and latest openocre 94 still no go.

 

[Feartech]

All kexts where up to date and latest openocre 94 still no go.

not much to go on when you say "no go...."

 

[supergreen71]

not much to go on when you say "no go...."

sorry, it boots in Ventura made USB but the graphics has a wired mosaic effect and I can't see a thing,

 

[Feartech]

sorry, it boots in Ventura made USB but the graphics has a wired mosaic effect and I can't see a thing,

missing your zipped EFI

 

[supergreen71]

missing your zipped EFI

sorry, it was taking longer to upload the efi. Thanks

 

[Feartech]

sorry, it was taking longer to upload the efi. Thanks

assumed the ig-platform-id would be for an icelake:
0000528A

device-id 5C8A0000

not sure if AAPL,GfxYTile is required

is Display-4d10-14cc.kext required?

FakePCIID.kext and FakePCIID_Intel_HDMI_Audio.kext shouldn't be used, not been updated for many years

XhciPortLimit should be disabled if you have setup your own ports correctly

may want to try aadding boot arguments:
-igfxcdc -igfxdvmt

also test MacBookPro16,2

 

[supergreen71]

assumed the ig-platform-id would be for an icelake:
0000528A

device-id 5C8A0000

not sure if AAPL,GfxYTile is required

is Display-4d10-14cc.kext required?

FakePCIID.kext and FakePCIID_Intel_HDMI_Audio.kext shouldn't be used, not been updated for many years

XhciPortLimit should be disabled if you have setup your own ports correctly

may want to try aadding boot arguments:
-igfxcdc -igfxdvmt

also test MacBookPro16,2

I know its much to ask, but could you please correct my EFI entries and reupload my EFI? No hard feelings if you say no, its just I am new to all this.

 

[Feartech]

I know its much to ask, but could you please correct my EFI entries and reupload my EFI? No hard feelings if you say no, its just I am new to all this.

not really, because if that doesn't work, then you would ask me to change something else etc

this was why I mentioned you started fresh/clean on your other thread, (the phrase trying to run before you can walk situation)

best to have a look at:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com

and:

[Guide] Booting The USB Installer Using OpenCore

A guide in setting up your USB installer using OpenCore. You must have either a built-in ethernet or compatible Broadcom Wifi in your laptop for this guide to work. Built-in Intel Wifi can also work if set correctly...

www.tonymacx86.com

being able to edit your own config.plist is a requirement for any hackintosher