[SOLVED] Help on TZ77XE3-V5 / i5-3570k / 2x GTX 660

[KShion619]

Hey guys,
I'm seeing exactly what I'm missing here on El Capitan with Clover, hoping that someone can shed some light on what SMBIOS/DSDT (if needed) and Clover's Config.plist changes I need from the defaults.
I can give a DSDT from AIDA64, LSPCI/USB from Linux, UEFI Settings, anything you guys need, Config.Plist and LSPCI are Attached
This PC stopped working with Mavericks halfway through its update cycle, hoping to dual boot it again using Clover's UEFI and Windows 10

Exact Specifications

• CPU: Intel 3570k @4.1GHz w/HD 4000 Series Integrated Graphics (Turned off)
• MB: BIOSTAR TZ77XE3 5.0 (From what I understand, its a GA-Z77-D3H with Realtek Parts instead of Atheros/VIA parts)
• RAM: 8GB of ValueRAM DDR3-1333MHz from Corsair
• LAN: Realtek RTL81xx GbE Family
• HDA: Realtek ALC892 AudioID:1 (6 port, no optical port , possible HDMI Audio through integrated HD 4000 GPU)
• AUDIO: Blue Yeti USB
• SSD: Crucial MX100
• HDD: 2x WD Blue 1TB
• GPU: 2x EVGA GeForce GTX 660 SC
• Wi-Fi: Atheros AR938x (TP Link WDN4800)
• CPU Cooler: Corsair H80i not plugged into a USB header
• Card Reader: Realtek USB 2.0 Card Reader
• Capture Card: AverTV HD DVR (C027)
• LAN: Linksys/Infineon Based AN983B PCI
• Chipset: C216 7 Series for all PCI-E and SATA ports
• BT: Generic 2.0 USB2 CSR Dongle
• Latest Clover as of May 06 2016

What's Working

• Audio Working using Audio ID 1 on ALC892 with toleda's Clover Patch
• Both GTX 660s working with Native Drivers but not Web drivers thus far
• USB 3.0 Ports working Natively and with GenericXHCI in EFI/Clover/Kexts
• LAN working with the RTL81xx driver in Multibeast in EFI/Clover/Kexts
• PS/2 Keyboard with the Voodoo PS/2 Keyboard Driver in EFI/Clover/Kexts
• Bluetooth Works Natively in a USB 3.0 Port
• Card Reader works as USB Hub, not showing as a card reader
• Power Management appears to work using The AppleIntelCPUPowerManagement Patch in Clover

What's Not Working

• Currently This Machine Appears to boot when it wants, Cant Find Kernel Cache/Sends read errors from the USB half the time and most of the time gets a Kernel Panic due to ACPIPlatformExpert.Kext not being found for my SMBIOS, Which I've tested on iMac 13,1 and macmini 6,2
• USB Ports seem to only be assigned to the Buses that have my boot media on them, otherwise no USB 2.0 ports are detected
• MX100 "Does not support TRIM"
• Both GTX 660s working with Native Drivers but not Web drivers thus far, CUDA/OpenCL would be a good plus, ill take it or leave it
• Does not resume from Sleep
• Card Reader works as a USB drive/hub, not showing as a card reader

Spoiler: LSPCI

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1)
02:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
04:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
06:00.0 PCI bridge: Integrated Technology Express, Inc. IT8893E PCIe to PCI Bridge (rev 41)
07:00.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
08:00.0 Multimedia video controller: Device 1a0a:6202 (rev 01)

 

[KShion619]

BUMP
Any Ideas about the USB/Boot? I think I can figure the rest out assuming I get it booting

 

[flicka]

Provide the clean DSDT. Attach your currently EFI/CLOVER folder (zipped). It can be usefull the content of S/L/E, L/E and EFI/CLOVER/kexts/10.11/other.
To obtain the kexts list do the following:
open terminal, copy/paste and execute:

ls -a /System/Library/Extensions

Click on "Shell", Export text with name.
Do the same with:

ls -a /Library/Extensions

Zip an post

 

[KShion619]

My System is completely vanilla as it is a Install USB at the moment, and last I had it running the only thing I changed was adding Kexts to Clover

 

[flicka]

Premise, better triyng all changes booting from a pendrive. It is enough you format it Macosx extended /Guid and copy your current EFI Folder in the EFI partition of the pendrive.

I had a look at your configuration. In drivers64UEFI you have a lot of stuff:

CsmVideoDxe-64.efi
DataHubDxe-64.efi
FSInject-64.efi
OsxAptioFixDrv-64.efi
OsxFatBinaryDrv-64.efi
PartitionDxe-64.efi
VBoxHfs-64.efi

My humble opinion is that these are enough

FSInject-64.efi
OsxAptioFixDrv-64.efi
OsxFatBinaryDrv-64.efi
VBoxHfs-64.efi (or HFSPlus.efi)

In kexts/10.11 I see you are using genericUSB, but you have Intel USB3.0 and this kext is not necessary, indeed counterproductive. Delete it.

Do the mentioned changes on the pendrive, try to boot and report how the system behave.
Now change the config.plist with the one attached and put the the DSDT.aml in EFI/CLOVER/ACPI/patched (not in origin, attention), reboot and check if all hardware i working fine.
I've a doubt about the Audio. You say "Audio Working using Audio ID 1 on ALC892 with toleda's Clover Patch", but I don't see any patch in Clover, nor the Realtek kext normally created from Toleda script.
You can try with the new AppleALC.kext (credits to Vit9696). Put it in kexts/10.11 (mandatory a vanilla AppleHDA in S/L/E and delete the Toleda realtek kext from S/L/E, L/E or kexts/10.11 if present)
Let me know your progress

 

[KShion619]

Alright, I dropped in all files and removed what was asked, and I run into a partially stated AMFILoadTrustedKeys log and a lockup, but did not have issues reading cache on the first go, a good sign
And about ALC892, I had it working using Toleda's patch, I did it after initial install, but thanks for the new Kext to try out!

 

[flicka]

Sorry but I don't understand. It is all working fine?

 

[KShion619]

Its not as random as far as getting the kernel cache, but doesn't boot, reaches the log post in the attached picture

 

[flicka]

And that with or without DSDT and config?

 

[flicka]

Are you sure you have no kexts installed in S/L/E nor in L/E?