- Joined
- May 10, 2011
- Messages
- 2,923
- Motherboard
- Gigabyte B550 Vision D
- CPU
- Ryzen 5900X
- Graphics
- RX 6800
- Mac
- Classic Mac
- Mobile Phone
Yes sure.@Middleman, hello sir. Something very unexpected just happened!. I have a GA-B550M-DS3H, Ryzen 5 3600X and a RX580 and I surprisingly booted into Big Sur 11.0.1, using a EFI, (attached below) through HackinDROM. Clearly I haven't touched the config.plist, I know this because its currently installing in Russian, and the SMBIOS should be MacPro, 7,1, but lets not get bogged down with these easily fixed details. Would you kindly take a peek at the EFI and suggest some revisions.
1) Looking at it, it seems mostly fine for now. To change the language, you need to go to your NVRAM find the key prev-lang:kbd and change the value to en-US:0.
2) For the SMBIOS I think you should leave it alone at iMacPro1,1 - that's the best setting for the Ryzen chip afaik.
3) Kernel patch - you will definitely need to change the value of the first 3 lines under Kernel > Patch to match your CPU as it is currently set for 12 core Ryzen 5900X. Check out the Dortania guide for this. Read the 'Modifying Kernel Patches' section here > https://github.com/mikigal/ryzen-hackintosh
4) You might need to look at the alcid value for your soundcard though and change it under the NVRAM. The device name will need changing too (currently under ALC1220).
5) I think you may need to check the ethernet device properties as there is more than one port enabled on this EFI (for the B550 Vision D?), plus also check if the WiFi card is the correct one added.
6) You could also enable the RX580.aml in ACPI for the AGPM.