- Joined
- May 29, 2012
- Messages
- 884
- Motherboard
- Gigabyte Z390 Gaming X
- CPU
- i9-9900K
- Graphics
- RX 6900 XT
- Mac
- Classic Mac
- Mobile Phone
Updated to OpenCore 0.8.5. My EFI is attached here and to the first post, with some minor changes to make it shareable.
If you have a 6900XTXH, make sure you enable
The other thing is that if you DON'T have a 6900XTXH, make sure you change the values in
If you use this EFI:
Rename
In the config.plist:
1. Confirm the values in
2. Add your values in
If you have a 6900XTXH, make sure you enable
ACPI > Add > 0 (Enable Radeon 6900XT WEG spoof - enable only if 6900XTXH is installed)
BEFORE you use the EFI. This is disabled as default because I'm not sure what will happen if it is enabled on a system that doesn't have a 6900XTXH card.The other thing is that if you DON'T have a 6900XTXH, make sure you change the values in
DeviceProperties > PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0).
If you use this EFI:
Rename
EFI > OC > Opus - Rename to config.plist
to config.plist
In the config.plist:
1. Confirm the values in
DeviceProperties > PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0).
2. Add your values in
PlatformInfo > ROM
. PlatformInfo > SystemProductName
, PlatformInfo > SystemSerialNumber
, PlatformInfo > SystemUUID